Trenchless pipe repair
Restore your pipes.
No digging required.
Brush coating is a trenchless epoxy repair method that rehabilitates aging or corroded pipes from the inside — no excavation, no torn-up floors, driveways, or yards.
What is brush coating?
A pipe within a pipe —
without the shovels.
Brush coating is a trenchless pipe repair method. A rotating brush device is pulled through the pipe, applying a protective epoxy resin coating to the interior walls.
Once cured, it forms a smooth, corrosion-resistant new interior surface — essentially a pipe within a pipe — without digging up floors, yards, or driveways.
The problem
Old pipes don't
always need replacing.
Corroded & scaled pipes
Over time, cast iron, clay, and older pipe materials corrode, scale, and pit on the inside — restricting flow and eventually leading to leaks or failure.
Costly full replacement
Traditional pipe replacement means excavation — tearing up floors, yards, or driveways. Expensive, disruptive, and slow.
Not always full failure
Many pipes aren't collapsed, they're just worn — which means full replacement is often more than what's actually needed.
Our process
Four steps.
One clean fix.
Camera Inspection
We start with a high-definition camera inspection to assess pipe condition and confirm brush coating is the right fit.
Hydro Jetting & Descaling
The pipe interior is thoroughly cleaned and descaled to create a clean, bondable surface for the coating to adhere to.
Brush Coating Application
Using specialized rotating brush equipment, we apply one or more coats of 100% solids epoxy resin evenly across the interior pipe walls, working carefully through bends and fittings.
Cure & Re-Inspection
Once cured, we re-inspect with the camera to verify full, even coverage and confirm flow has been restored.
Why brush coating?
Modern repair.
Real advantages.
No digging
Fully trenchless — no excavation of floors, yards, or driveways.
Fast
Most jobs completed in a single day. Pipes back in service within hours of curing.
Durable
Cured epoxy is extremely strong and corrosion-resistant, extending pipe life significantly.
Improves flow
The smooth interior coating reduces friction, scale buildup, and future clogging.
Multiple materials
Works on cast iron, clay, concrete, and PVC pipe systems.
Cost-effective
A fraction of the cost — and disruption — of full pipe replacement.
Straight talk
Is brush coating right
for your pipes?
Brush coating is ideal for pipes that are structurally sound but corroded, scaled, or aging. It is not a fix for pipes with major structural damage, collapse, or heavy tree root intrusion — those situations need full lining or replacement instead.
We determine the right approach with a camera inspection first — because the honest recommendation is always better than an oversold one.
- Corroded or scaled cast iron
- Aging clay or concrete drains
- Pipes with pitting, minor leaks, or rough interiors
- Recurring slow flow that jetting alone doesn't hold
- —Fully collapsed or crushed pipe sections
- —Major structural breaks or offset joints
- —Heavy tree root intrusion breaking the wall
- —Pipes that need full lining or replacement
Think brush coating
might be right for you?
Let's find out — starting with an honest camera inspection.
Ready when you are
Sewer problem?
We're on the way.
Call now and speak with a real technician. Fast response across every Brooklyn neighborhood.